Safety instructions, How to connect electricity – Samsung RL41WCSW User Manual

Page 3

Advertising
background image

3

SAFETY INSTRUCTIONS

PROPER DISPOSAL OF THE REFRIGERATOR
Before you throw away your old refrigerator or freezer

When disposing of this or other

refrigerators, remove the door/door seals,

door latch so that small children or animals

cannot get trapped inside.
Leave the shelves in place so that children

may not easily climb inside.
When this product contains flammable

gas (Refrigerant R600a) contact your local

authority with regard to safe disposal of this

product.

Cyclopentane used as a insulation

blowing gas.

The gases in the insulation material require

special disposal procedure. Please dispose

of the packaging material for this product in

an environmentally friendly manner. Please

contact your local authorities in regard to the

environmentally safe disposal of this product.

This product contains flammable insulation

blowing gas.

Please dispose of the packaging

material for this product in an

environmentally friendly way.

CAUTIONS

• The refrigerant used in the refrigerator/freezer and the gases in the insulation

material require special disposal procedures. Ensure that none of the pipes

on the back of the appliance are damaged prior to disposal.

WARNING

HOW TO CONNECT ELECTRICITY

When moving the refrigerator, be careful not

to roll over or damage the power cord.

Do not insert the power cord with wet

hands.

Unplug the refrigerator before cleaning and

making repairs.

Do not use a wet or damp cloth when

cleaning the plug. Remove any foreign matter

or dust from the power plug pins. Otherwise

there is a risk of fire.

If the refrigerator is disconnected from the

power supply, you should wait for at least five

minutes before plugging it back.

If the wall socket is loose, do not insert the

power plug. There is a risk of electric shock

or fire.

The refrigerator should always be plugged

into its own individual electrical outlet

which has a voltage rating that matches

the rating plate.

This provides the best performance and

also prevents overloading house wiring

circuits, which could cause a fire hazard

from overheated wires.
Never unplug your refrigerator by pulling

the power cord. Always grip plug firmly and

pull straight out from the outlet.
Make sure that the power plug is not

squashed or damaged by the back of the

refrigerator.

Do not bend the power cord excessively or

place heavy articles on it.

Have the power code repaired or replaced

immediately by the manufacturer or its

service agent if the power cord has become

frayed or damaged. Do not use a cord that

shows cracks or abrasion damage along its

length or at either end. If the power cord is

damaged, have it replaced immediately by

the manufacturer or its service agent.

CE Notice

This product has been determined to be in
compliance with the Low Voltage Directive (2006/95/
EC), the Electromagnetic Compatibility Directive
(2004/108/EC) and Energy efficiency Directive
(96/57/EC) of the European Union.

DA99-01220J.indb 3

2010.6.23 10:44:21 AM

Advertising
This manual is related to the following products: