AIPTEK 3D HD-DV Camcorder - Manual (Page 10)

7
1. Adjust the focus:
Normally the camcorder can auto focus without adjusting
focus. If you want to take close-up pictures, you can push
the Up button to switch to Macro mode ( ).
Note: Please make sure your memory is inserted before
recording.
- 30cm ~ (12” ~ )
5cm ~ 30cm (2” ~ 12”)
$W;¿[HG]RRP
2. Zooming:
Move the Zoom EXWWRQXSRUGRZQWR]RRPLQRU
]RRPRXWWKHVFUHHQ7KHRSWLFDOPDJQL¿FDWLRQLV 3X.
3. Press the Shutter button half way down and
hold for the camcorder to auto focus. When the
focus frame turns green, press the button fully
down to take a still picture.
Taking a still picture
Adjust other advanced settings if necessary.
If the surroundings are dark, you can switch the LED
lights mode to On or Auto to help focus and lighting.
Zoom in
Zoom out
focus frame
Due to the sensor capture feature, the LCD preview and ratio of still picture
capture will vary depending upon different video resolution settings.
The image capture of the camera is set where as video resolutions are different.
Video resolution Preview
Taking pictures
and focusing
HD(1280x720) 16:9 ratio 4:3 ratio
D1(720x480) 4:3 ratio 4:3 ratio
CIF(352x288)