AIPTEK 3D HD-DV Camcorder - Manual (Page 14)

11
Connecting the camcorder to Standard TV
TV = Traditional CRT TV
1. Power on the camcorder.
2. Press the MODE key to enter the Mode menu.
3. Use the Joystick switch to the Setting mode and press OK to enter
the menu screen.
4. Use the Joystick to select the TV-out item, and then press OK to
FRQ¿UP
5. Move the Joystick up/down to select NTSC or PAL.
NTSC or PAL system is different across countries, please refer to
page 14 for the Flicker Setting table.
6. When done, press OK WRFRQ¿UPWKHVHWWLQJ
7. Press the Shutter key to return to the preview screen.
8. Connect the audio and video ends of the AV cable (yellow/white/red
color) to the TV “AV-IN” jacks.
9. Connect the other end of the AV cable to the “AV out” port on your
camcorder.
AV cable
Video Audio
AV mode
AV-IN
AV Out