Connecting and preparing your tv, Assembling the cables, Using the stand-base – Samsung PS50B530S2W User Manual
Page 4: Checking parts
English - 4
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the floor
N
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
-20° ~ 20°
Checking Parts
Owner’s Instructions
Remote Control /
AAA Batteries (2ea)
Power Cord
Cloth-Clean
Warranty Card /
Safety Guide Manual
(Not available in all locations)
Screws (4ea)
Cover-Bottom
Holder-Ring (4ea)
(Refer to page 34)
Ferrite Core for
Power Cord (1ea)
Holder-Wire Cable
The ferrite core is used to shield the cable from interference. When connecting a cable, open the ferrite core
N
and clip it around the cable near the plug as shown in the figure.
Connecting and Preparing Your TV
BN68-02355H-Eng.indb 4
2009-08-28 �� 2:49:47