Samsung RL55VTEBG - Manual (Page 14)

14_ setting up
2. Remove the Top cover. Make sure to disconnect
the wire underneath the Top cover.
Be careful not to damage the electrical wires
when removing the Top cover.
3. Disconnect the wire and then remove 3 bolts on
the top of the refrigerator.
Make sure the Fridge door is closed fi rmly.
4. Remove the Fridge door from the Middle hinge
by carefully lifting the door straight up.
Fridge door is heavy, be careful not to injure
yourself when removing the Fridge door.
5. Disassemble the Middle hinge by removing 2
bolts and a screw on the right side.
Remove the Freezer door from the Bottom hinge
by carefully lifting the door straight up.
Freezer door is heavy, be careful not to
injure yourself when removing the Freezer
door.
CAUTION
CAUTION
CAUTION
CAUTION
REVERSING THE
REFRIGERATOR DOOR
Samsung recommends that reversing of
the door opening is only completed by
Samsung approved Service providers.
This will be on a chargeable basis and at the
customers expense.
Any damage caused while attempting to
reverse the door opening is not covered
under the appliance manufactures warranty.
Any repairs requested due to this
circumstance will be completed on a
chargeable basis at the customers expense.
Required Tools
Not provided
Phillips Head
Driver (+)
Flat Head
Driver (-)
10mm Socket
Wrench
(for bolts)
Not provided Additional part
11mm Wrench
(for hinge shaft)
3/16” Allen
Wrench
(for middle
hinge)
Top Left
Hinge Cover
(Underneath the
Top Cover)
1. Remove 4 screws on the Top cover of the
refrigerator.
Make sure your refrigerator is unplugged
before handling electrical wires.
WARNING
WARNING
Screw
Middle hinge
Middle hinge
Bottom hinge
DA99-02116L-10.indb 14 DA99-02116L-10.indb 14 2014. 4. 16. 1:41 2014. 4. 16. 1:41