Samsung RL55VTEBG - Manual (Page 17)

setting up _17
01 SETTING
UP
25. Detach the Fridge and
the Freezer door gaskets
and then attach them
after rotating them 180˚.
After reversing the doors, make sure
the Fridge and Freezer door gaskets are
properly arranged. If not, there might
be a noise or dew formed which affects
perfomance of the refrigerator.
REVERSING THE DOOR
HANDLE (TYPE A)
1. Remove 2 screws underneath the Fridge door
and then take off 2 Cap sheets and remove 2
screws on the Freezer door.
2. Slightly push down the Fridge handle and then
remove it by pulling it toward to you.
Slightly push up the Freezer handle and then
remove it by pulling it toward to you.
Disassemble the door handle carefully. Hooks
inside of the door handles can break easily.
CAUTION
REVERSING THE
REFRIGERATOR DOOR
(CONT’D)
21. Carefully put the Fridge door back on.
Then tighten 3 bolts to assemble the Top hinge.
• You must reverse the Type B door handle
before putting the Fridge door back.
Please refer to page 18.
• For Door handle Type A, make sure to
switch the door handle after reversing the
door.
22. Connect wires and then assemble the Wire cover
on the top of the Fridge door.
23. Change the position of the Top hinge cap.
Connect the wire under the Top cover and put
the Top cover back to its original position.
24. Tighten 4 screws back
to its place.
Top hinge cap
DA99-02116L-10.indb 17 DA99-02116L-10.indb 17 2014. 4. 16. 1:41 2014. 4. 16. 1:41