Acumen HR440 - Manual (Page 7)

6
Start from the Time-of-Day Mode.
1. Press & hold the SET button to enter
the time setting mode. (The Day indica-
tor changes to Year).
2. Hour (blinking) --Set by pressing the
MODE or ALARM button. Press the LAP
button to proceed to the next item.
3. Minutes (blinking) --Set by pressing
the MODE or ALARM button. Press the
LAP button to proceed to the next item.
4. Month (blinking) --Set by pressing the
MODE or ALARM button. Press the LAP
button to proceed to the next item.
5. Day (blinking) --Set by pressing the
MODE or ALARM button. Press the LAP
button to proceed to the next item.
6. Year (blinking) --Set by pressing the
MODE or ALARM button. Press the SET
button to input information and pro-
ceed to the Alarm settings.
7. Daily alarm (blinking) --Set on or off
with the MODE or ALARM button (bell is
showing when ON). Press the LAP but-
ton to proceed to the next item.
8. Alarm hour (blinking) --Set by press-
ing the MODE or ALARM button. Press
the LAP button to proceed to the next
item.
9. Alarm minutes (blinking) --Set by
pressing the MODE or ALARM button.
Press the SET button to Exit the setting
mode.
Helpful Tip: If you make a mistake,
simply continue clicking the LAP but-
ton to get back to the item you wish
to correct.
SETTING THE CLOCK/CALENDAR