Setting timers, calorie information & target zone – Acumen HR440 User Manual

Page 9

Advertising
background image

TARGET ZONE CALCULATION FORMULA

220 - Your Age = max HR

For a 30 year old person, your

calculations would be as follows:

220 - 30 = 190 Maximum Heart Rate

65% of this number = 123.5
85% of this number = 161.5

8

Start from the Heart Rate/Stopwatch
Mode

1. Press & hold the SET button to enter
the setting mode.

2. Interval Timer (blinking) --Set the min-
utes pressing the MODE or ALARM but-
ton (0-99 min., default is 0). Press the
LAP button to proceed.

3. Target-Trac (blinking) --Set the Goal
Alarm pressing the MODE or ALARM
button (5 min. blocks 0-60, default is 20
min.). Press the LAP button to proceed
to the next item.

4. Exercise Factor (blinking) --Set by
pressing the MODE or ALARM button
(see exercise chart on page 13). Range
1- 20, default is 5). Press the LAP but-
ton to proceed to the next item.

5. Age (blinking) --Set by pressing the
MODE or ALARM button (Range is 7-99,
default is 30). Press the LAP button to
go back around to the Interval Timer or
the SET button to proceed to Calorie
Set-Up.

SETTING TIMERS, CALORIE INFORMATION
& TARGET ZONE

Note: If you want to use the built-in EZ-Setting of 65-85% of
your max, set only your age and skip the next section by press-
ing SET.

AGE

The calculated exercise range for a 30 year old would be a low of 124
and a high of 162 beats per minute. You should never exercise near
your maximum heart rate (max HR) for any period of time.

Advertising