Bodyline Products International AX-4330 - Manual (Page 12)

Axis Edge |22| english Axis Edge |23| english
*If the shaver is used with the outer foil frame incorrectly set to the body,
this will typically produce a poor shave and unusual sound.
* Do not remove the outer foil from the outer foil frame.
4. Before cleaning the trimming blade, slide the power switch off.
Notes: After cleaning the shaver, apply shaver oil (sold separately) to the
outer foil surface once every 3 uses. When the shaver has not used for a
long time, be sure to clean the outer foil, inner blade and trimming blade,
and apply shaver oil to the outer foil surface.
FOR RECYCLING THE Ni-Mh BATTERY
Never disassemble the shaver to remove the Ni-Mh battery except to
dispose of the shaver.
The Ni-Mh battery in your shaver is recyclable. When you dispose of the
shaver, please take care to remove the Ni-Mh battery and recycle it.
How to remove the Ni-Mh battery
> Turn on the power switch, and run the battery down until the inner
blade stops moving. If the shaver is disassembled before the recharged
electricity is depleted, it may cause a shock, catch fire and cause burns.
> Follow the procedure below to disassemble the shaver with a screw-
driver.
screw cap
screw
side panel
rear case
Ni-Mh battery
A B