Bodyline Products International AX-4330 - Manual (Page 13)

Axis Edge |2| english Axis Edge |2| english
1. Remove the outer foil frame, outer foil frame and inner blade.
2. Use a flat blade screwdriver to remove the screw cap and side panels.
(See the illustration “A”.)
3. Loosen and remove the 3 screws with a Phillips screwdriver, and
remove the read case. (See the illustration “A”.)
4. Take out the Ni-Mh battery, and cut the lead wires. (See the illustration
“B”.) In doing so, take care not to short circuit the (+) and (-) terminals.
SPECIFICATIONS
> Power supply: rechargeable
battery/AC power supply
> Blade motion
Inner blade: reciprocating
Trimming blade: reciprocating
> Rated voltage: AC 100 V – 240V
> Rated frequency: 50/60 Hz
> Rated current: 200 mA
> Rated time: 5 minutes
> Standard recharging time: 1 hour
> Battery: Ni-Mh cell (enclosed type), 2 pcs.
> Battery voltage: 1.2 V x 2
> Weight: 180 g
> Operating temperature range:
0°C – 40° C
* The above specifications are subject to change without prior notice for