Actiontec electronic UP101 - Manual (Page 24)

21
Installing the
Internet Phone
Wizard Software
After installing the Skype™ software (see chapter 2) and connecting the Internet
Phone Wizard to a computer and phone outlet (see chapter 3), the Internet Phone
Wizard software must be installed on the computer.
☞
Note: This procedure is performed using Windows XP . If using
Windows 2000 or Windows XP (Service Pack 2), see the notes
following certain steps for any additional instructions.
To install the Internet Phone Wizard software:
1. After connecting the Internet Phone Wizard, a “Found New Hardware” win-
dow appears. This may take up to 15 seconds.
2. Insert the Installation CD in the CD - ROM drive of the computer, then, from
the “Found New Hardware Wizard” window, click in the circle next to “Install
the software automatically (Recommended).” Click Next.
☞
Note: If the computer is running Windows 2000, when the
Found New Hardware Wizard window appears, click Next. In
the next window, click in the circle next to “Search for a suitable
driver for my device,” then, in the next window, make sure the
“
CD - ROM ” check box is active. If running Windows XP with
Service Pack 2 installed, when the Found New Hardware Wizard
window appears, click in the circle next to “No, not this time.”
4