Actiontec electronic UP101 - Manual (Page 30)

26
Actiontec Internet Phone Wizard User Manual
27
Chapter 5 Using the Internet Phone Wizard
Receiving a Call
1. The telephone connected to the Internet Phone Wizard rings.
2. The Internet Phone Wizard’s Regular Call or Internet Call light flashes,
depending on what kind of incoming call is being received.
3. Skype activates, and the Skype window appears.
4. Pick up the receiver and conduct a conversation.
The Skype window has a timer that displays the duration of the call.
Ending a Call
To end a call, put the receiver back onto the telephone.
Switching Between Regular Call and Internet Call Modes
If the Internet Phone Wizard is connected in Dual Line mode, press “#” key twice
to switch between the Regular Call and Internet Call modes.
Call Waiting Alert
The Internet Phone Wizard’s call waiting feature works only in the Dual-Line
mode. If a regular call comes in while an Internet call is active, a short beep is
heard on the telephone. Press the “#” key twice to answer the regular call. To go
back to the Internet call, press the “#” key twice again. The call waiting features also
applies if an regular call is active and an Internet call is received.
Ringback Alert
If the phone is hung up while a previous call is on hold, the Internet Phone Wizard
rings back to alert the user that a call is still on hold. To continue the call on hold,
pick up the receiver.