ASKO W6641 W661 - Manual (Page 12)

Page 12
Models W6661 and W6641 have ASKO’s state-of-the-
art EasyControl™ panel, as illustrated below. To select
a wash program, simply press one of the preset
Door Open Button
Press to open the
glass door.
Preset Programs
Press one of these buttons
to select a program.
LCD Window
Displays the wash program, spin speed,
temperature settings, and program run time.
Power Button
Press to turn on
power to the
machine.
Program Selection Controls
These buttons allow you to customize the preset program
settings, such as wash temperatures, spin speed, rinses,
display language, etc. Refer to pages 15-17 for instructions.
Power Indicator Light
Glows when the power
is turned on.
Start/Stop Button
Press to start or
stop/interrupt a
program.
THE CONTR THE CONTR OL P OL PANEL ANEL
W6641 W6641 AND AND W6661 OPERA W6661 OPERATING INSTR TING INSTRUCTIONS UCTIONS
program buttons then press Start. Refer to “Preset
Programs” below for a definition of these programs.
DOOR OPEN BUTTON
The power must be on and you must press this button
to open the glass door. There will be a few seconds
delay before the door opens.
If you need to open the door during a program, press
and hold Door Open for a few seconds. The machine
will stop and automatically drain enough water so the
door can be opened safely. The program will resume
when you close the door. For instructions on how to
open the door manually in case of power failure, see
page 21.
POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can open
the glass door, set the programs or start the machine.
START/STOP BUTTON
This button starts or stops a program. To stop a
program, press and hold this button for a few seconds.
If you stop a program using the Start/Stop button, you
will have to reselect a program and press Start/Stop to
restart the machine.
UNDERST UNDERSTANDING ANDING THE L THE LCD CD WINDO WINDO W W
rpm
Spin speed for the
selected program.
Program Time
When you start a program, the
total time the program runs is
displayed. As the program
progresses, the time remaining
displays. The program time
toggles between the hours (e.g.,
1h) and the minutes (e.g., 2 2 ).
Temperature
Wash temperature for the
selected program.
Stop
Indicates that the program has
ended or that you pressed Stop.
Start
Indicates that you pressed Start
and the program is running.
Preset Programs
Displays the program that
is selected/running.
Program
When you press the Power
button, the display toggles
between the program
numbers and the wash
program names, (e.g.,
Normal, Super quick, etc.)
Door Open
Displays when you press
the Door Open button.
The LCD window is easy to read and understand. It
displays the wash program selection along with the
wash temperature, spin speed, and program run time. The illustration below explains each item on the LCD
window.