Acer 1300 series - Manual (Page 74)

Software 64
En
glish
• Select Exit (No Save) on the Exit menu.
• Press the Enter key to close the BIOS setup utility without saving any changes.
• Alternatively, you can select Cancel or press the Esc key to keep the BIOS setup
utility open.
Retype the password in the Confirm new password field.
Default Settings
This menu item allows you to restore the default BIOS settings, before closing the BIOS
setup utility and rebooting the computer. The default settings are the configuration
that was set in the factory.
• Select Default Settings on the Exit menu.:
• Press the Enter key to load the default settings. The BIOS setup utility will close,
and the computer will reboot with the default BIOS settings.
• Alternatively, you can select Cancel or press the Esc key to keep the original
settings. In this case, the BIOS setup utility will remain open.
As1300_E.book Page 64 Tuesday, July 9, 2002 2:01 PM