ABL electronic USB 2.0 Camera Microphone none - Manual (Page 2)

Trouble Shooting Trouble Shooting
Record Image By AMCAP Record Image By AMCAP
The set capture file will be rewritten each time when you carry out
the recording.
If you want to keep the recording file, copy the file and paste to
another location for storage.
Camera Function Camera Function
Digital zoom & Tracking
function
You can choice your favorite
effect function.
You can adjust your image
quality by parameter setting
page.
Before recording, click "file"->"Set capture file"->select a path,i.e. desktop.
Then create the name for the capture file with AVI extension, i.e.
example.avi.
Please run Amcap and find options->video capture filter.
To select your audio device "USB camera "and enable capture audio
recording function.
To record select capture tab and select 'Start Capture' and press "OK"
To stop recording select 'Stop Capture'
To play recording , double click on the set capture file this will initialize
Windows Media Player, or go into Windows Media Player separately.
To click "file->"Allocate file space "
It is suggest to set the file size to 1Mbytes.
K00-36219-MED V1.0
Problem Solution
The camera shows no
imageafter being connected
toUSB port on the PC
1.Make sure the USB connectors are connected properly at both ends.
2.Exit the program, re-connect the device and start the program again.
3.Make sure that you have installed the driver properly.
1.The camera might be dropped or moved accidentally. Try to adjust the focus again.
2.Check if there is anything sticking on the camera lens, if so,clean it with soft wiper.
The image taken and
shownon the PC screen is
blurred
The pictures have black
stripes
1.When use the camera indoor, make sure the electric frequency of lighting system does match the
camera's specification (50Hz or 60Hz).
How to operate the
shutterbutton
1. The button supports TWAIN interface only, for example, only Windows format
2. Select "file" select "scanner" and select your camera model "Mic Cam 2.0",then click OK
3. Select "File", select "New Scan" and now the dialog box shows an image from yourcamera.
4. The button on the camera is equal to the capture button of the dialog box.
The images turn slow
whenviewing in VGA
mode(640x480pixels)
This is because the volume of transmission data is getting bigger under VGA mode.To improve the
performance, suggest to upgrade the computer hardware or choosethe option 'I420' in camera setting.
There are strips or
blackshadow on the images
Please re-set the display level as 24 bits or 32 bits true color.
Why no image turns up while
running the programs
Please click the"Preview" under the "Options" section.
Special effect function
just based on 640*480
pixels