Alpine CVA-1003 - Manual (Page 34)

32
-EN
Other Useful Features
Adjusting Color of Picture
Color adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes. Color
adjusment cannot be made if a Navigation system
with the RGB feature is connected.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select COLOR.
3
Press the g DN or f UP button to make
the color of the picture brighter or darker
respectively to get your desired color. You can
adjust the color between MIN (–16) and MAX
(+16). When it reaches the minimum or
maximum point, the display shows "MIN" or
"MAX" respectively.
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
NOTE
The Color setting for the Blue screen background and the
Color of the Picture source (AUX/DVD/NAV.) will be
individually memorized.
Adjusting Tint of Picture
Tint adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjusment cannot be made if a Navigation
system with the RGB feature is connected.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select TINT.
3
Press the g DN or f UP button to adjust
the Tint (between –16 and +16). When it reaches
the minimum or maximum point, display shows
"R MAX" or "G MAX" respectively.
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
NOTE
The TINT setting for the Blue screen background and the
TINT of the Picture source (AUX/DVD/NAV.) will be
individually memorized.
g g g g g DN
f f f f f UP
Preset 1
Preset 2
SETUP