Alpine CVA-1003 - Manual (Page 37)

35
-EN
Other Useful Features
Setting the Clock Display
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 2 button to select GENERAL
setting mode. Press the Preset 2 button again to
select CLOCK DISP.
3
Press the g DN or f UP button to turn off
or on the clock display on the monitor display
respectively.
To set another setting, press the Preset 2 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
Displaying Time
1
When the monitor display is closed, press the
CLOCK button repeatedly until the clock time is
displayed in the sub display.
NOTES
• Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed
for about 5 seconds before the time returns to the
display.
• The clock time is not shown on both the monitor
display and the sub display simultaneously.
Setting Time
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 2 button to activate GENERAL
setting mode. Press the Preset 2 button again to
select CLOCK ADJ., then press the TUNE button
or g DN / f UP button to appear the clock
adjusting menu.
3
Press the Preset 2 button to select HOUR. Then
press the g DN or f UP button to adjust
the hour.
4
Press the Preset 2 button to select MINUTE.
Then press the g DN or f UP button to
adjust the minutes.
To quickly set the time to the nearest hour, press
the Preset 2 button to select MINUTE ZERO,
then press the TUNE button or g DN / f UP
button.
If the minutes is ":30" or under, the hour is the
current number. If the minutes is more than ":30",
or If you set the minute to "00", the hour is
moved up.
To return to the previous mode, press the Preset
2 button to select RETURN, then press the
TUNE button, or the g DN or f UP button.
5
After setting is completed, Press the SETUP
button to return to normal mode.