Samsung EC-L73ZZSBA-US - Manual (Page 58)

《57》
Setup menu
Yellow - Video
White - sound
[ Selecting Video out type ]
■ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
■ Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the
stored still images or movie clips by connecting the
camera to an external monitor via the AV cable.
When the camera is connected to an external
monitor, the LCD monitor will be turned off
automatically.
NTSC
PAL
Format
Delete All
Copy to Card
Video Out
Reset
◀
Exit:BACK
● When this menu is selected without inserting a memory card, you can select
the [Copy To Card] menu but the menu can’t be run.
● If there is not enough space available in the memory card to copy saved
images in the internal memory (19MB), the [Copy To Card] command will
only copy some of the images and then display a [Memory Full!] message.
Then the system will return to the playback mode. Please be sure to delete
any unnecessary files to free up space before inserting the memory card
into the camera.
● When you move the images that are stored in the internal memory to the
memory card, the next number of file names will be created in the card to
avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [Copy To
Card], the last stored image of the last copied folder is displayed on the
LCD monitor.
INFORMATION