Samsung EC-L73ZZSBA-US - Manual (Page 62)

《61》
Before contacting a service centre
The images are unclear
ㆍA picture was taken of the subject without setting an appropriate macro mode
→ Select an appropriate macro mode to take a clear image.
ㆍA picture was taken beyond the flash range
→ Take a picture within the flash range
ㆍThe lens is smudged or dirty
→ Clean the lens
The flash does not fire
ㆍFlash off mode has been selected
→ Dis-engage flash off mode
ㆍThe camera mode can't use flash
→ Refer to the FLASH instruction (p.27)
Incorrect date and time is displayed
ㆍThe date and time have been set incorrectly or the camera has adopted the
default settings
→ Reset the date and time correctly
The camera buttons do not operate
ㆍCamera malfunction
→ Remove and re-insert the battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ㆍIncorrect memory card format
→ Re-format the memory card
The images don't play back
ㆍIncorrect file name (Violation of DCF format)
→ Do not change the image file name
Battery power quickly drains
ㆍThe Camera is being used in low temperatures
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
take it out to take pictures
Camera does not take a picture when the Shutter button is pressed
ㆍThere is insufficient memory capacity
→ Delete unnecessary image files
ㆍThe memory card has not been formatted
→ Format the memory card (p.56)
ㆍThe memory card is exhausted
→ Insert a new memory card
ㆍThe memory card is locked
→ Refer to [Card Locked!] error message
ㆍThe camera’s power is off
→ Turn the camera power on
ㆍThe battery is exhausted
→ Insert charged battery (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍThe camera stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on