Samsung L83T - Manual (Page 21)

《20》
■ Things to watch out for using the ASR mode
- The digital zoom will not operate in the ASR mode.
- If the lighting condition is brighter than fluorescent lighting conditions, the ASR
will not activate.
- If the lighting condition is darker than in fluorescent lighting conditions, camera
shake warning indicator ( ) will display. For best results only take pictures
in situations where the camera shake warning indicator ( ) is not displayed.
- If the subject is moving, the captured image may be blurred.
- Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
- As the ASR uses the camera's digital signal processor, it may take a little
longer for the camera to process and save the images.
Starting the recording mode
Selecting the automatic mode will configure the camera with optimal settings
and you can manually configure various functions.
1. Select the Program mode by pressing the M
(Mode) button (p.33).
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
※ Refer to page 34-53 for more information about
the Program mode menus.
How to use the Program mode
This mode will reduce the effect of camera shake and help you get a well-
exposed image in dim conditions.
1. Select the ASR mode by pressing the M (Mode)
button. (p.33)
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
How to use the ASR mode