Samsung L83T - Manual (Page 64)

Starting play mode
《63》
Movie clip capture function
You can capture still images from the movie clip.
■ How to capture the movie clip
1. Press the Play / Pause button while playing the
movie clip. Then press the E button.
2. The paused movie clip is saved in a new file
name.
※ The captured movie clip file is the same size as
the original movie clip (800x592, 720x480,
640x480, 320x240).
※ When you press the E button at the beginning
of the movie clip, the first frame of the movie
clip will be saved as a still image.
On camera movie trimming
You can extract desired frames of movie clip during the movie clip play back.
If the running time is under 10 seconds, the movie clip can’t be trimmed.
1. Press the Pause button at the point of the movie
clip where you want to start extracting.
2. Press the T button.
3. Press the Play & Pause button and the
extracted range will be displayed on the status
bar.
4. Press the Play & Pause button once more at
the point where you wish the extracted file to
stop.
5. Press the T button and a confirmation window
will be displayed.
6. Select a desired sub menu by pressing the
Up/Down button and press the OK button.
[No]
: The movie trimming will be cancelled.
[Yes] : The extracted frames are saved as a
new file name.
[Press the E button]
[Paused]
● If you don't specify the ending point of the movie clip, the trimming
confirmation window will be displayed at the point of the last frame.
Trim Capture T E
Confirm OK
Trimming?
No
Yes
Trim Capture T E
Trim T