Samsung SGH-T879ZBBTMB - Manual (Page 244)

239
To connect using USB Tethering:
1. Press ➔ and then tap Settings ➔ More... ➔
Tethering and Mobile HotSpot.
2. Plug in the USB cable between your computer and your
phone.
3. When prompted for a USB mode, press to exit the
menu.
4. Tap USB tethering from the Tethering menu. This places
a green check mark next to the entry and activates the
feature. A Tethering or HotSpot active notification
briefly appears on the screen.
Look for the Tethering active icon in the Status
bar area of the screen.
5. Read the on-screen notification regarding data use and
tap OK.
To disconnect tethering:
1. Press ➔ and then tap Settings ➔ More... ➔
Tethering and Mobile HotSpot.
2. Tap USB tethering from the Tethering menu to remove
the check mark and deactivate the feature.
3. Remove the USB cable from the phone.
Mobile HotSpot
This feature allows you to turn your device into a Wi-Fi
HotSpot. The feature works best when used in conjunction
with HSPA+ (4G) data services (although 3G service can also
be used).
The Mobile HotSpot connectivity is a wireless version of this
same functionality and allows you to provide Internet
connectivity to multiple devices.
Important! The Mobile HotSpot service can not be active at the
same time as Wi-Fi. Please close your Wi-Fi
connection prior to launching this service.
Note: You must have a tethering plan on your account to use
the Mobile HotSpot. You can not use data on the device
while it is being used as a HotSpot.
To activate the Mobile HotSpot service:
1. Press ➔ and then tap Settings ➔ More... ➔
Tethering and Mobile HotSpot.
2. In a single motion touch and slide the Mobile HotSpot
slider to the right to turn it on . OFF ON