Samsung SGH-T879ZBBTMB - Manual (Page 264)

259
Note: Connecting to 2G networks slows the data transfer
speed and time.
Using the 3G Network
If you are using applications that require the 3G network
speed, follow these instructions to connect to the 3G
network.
1. Press ➔ and then tap Settings ➔ More... ➔
Mobile networks ➔ Network mode.
2. Tap WCDMA only. A check mark displays next to this
option to indicate that it is active.
Network Operators
Using this feature you can view the current network
connection. You can also scan and select a network operator
manually, or set the network selection to Automatic.
1. Press ➔ and then tap Settings ➔ More... ➔
Mobile networks.
2. Tap Network operators. The current network connection
displays at the bottom of the list.
Important! You must deactivate data service prior to searching
for an available network.
3. Tap Search now to manually search for a network.
4. Tap Select automatically to automatically select a
network connection.
Note: Connecting to 2G networks slows the data transfer
speed and time.
Default Setup Options
Your phone default is set to Automatic (to automatically
search for an available network. You can set this option to
Manual to select a network each time you connect.
1. Press ➔ and then tap Settings ➔ More... ➔
Mobile networks ➔ Network operators.
2. Tap Default setup.
3. Tap Manual to locate and connect to a network
manually.
– or –
Tap Automatic to allow the device to automatically
select a network.