Samsung HPP5581X-XAA - Manual (Page 41)

41
3 Press the ▲ or ▼ button to select the antenna
connection, then press the ENTER button.
Notes
• Air : “Air” antenna signal.
• Cable : “Cable” antenna signal.
• Air+Cable : “Air” and “Cable” antenna signals.
If the CableCARD is inserted into the “CableCARD”
slot on the rear panel, “Cable” and “Air+Cable”
are not available.
When selecting Cable TV system :
Press the ▲ or ▼ button to select “Cable”, then press the
ENTER button.
Press the ▲ or ▼ button to select “STD”, “HRC”, or
“IRC”, then press the ENTER button.
Note
• STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to “Storing Channels in
Memory”.
Select the antennas to memorize
Air
Cable
Air + Cable
Auto Program T V
Move Enter Return
Start
Start
Start
Select the antennas to memorize
Air
Cable
Air + Cable
Auto Program T V
Move Enter Return
Start
Start
Start
Select the cable system.
STD
HRC
IRC
Auto Program T V
Move Enter Return