Samsung HPP5581X-XAA - Manual (Page 69)

69
Selecting the DVI Standard
This feature is for aligning the screen image center dislocated by differences between
various DVI and HDMI signal sources.
The initial setting is “861B”. If you experience a mis-aligned screen image OK when
the “DVI and HDMI INPUT” jack on the rear of your TV is used for an external device,
switch the setting to “SMPTE”.
This feature only works when the external source is set to “DVI and HDMI”. Refer to
the “Viewing an External Signal Source” on the page 48 for further details.
1 Press the MENU button. Press the ▲ or ▼ button to
select “Setup”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “DVI Signal”, then
press the ENTER button.
Press the ▲ or ▼ button to select “861B” or
“SMPTE”, then press the ENTER button.
3 Press the MENU button to exit.
Language : English √
Time √
V-Chip √
Caption √
Menu Transparency : Medium √
Function Help : Off √
† More
Setup T V
Move Enter Return
… More
Color Weakness
: Off
Fan : On
Plug & Play
DVI Signal : 861B
CableCARD TM
Setup T V
Move Enter Return
SMPTE
861B