Samsung HG40NC460KFXZA - Manual (Page 13)

13
English
¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item initial Value Description
Hospitality
Mode
Hospitality Mode Standalone
Select Hospitality mode.
• Stand-alone mode : TV works alone.
SI Vendor SI Vendor OFF Stand-alone mode : OFF / Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num
… When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
• Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume Last Saved
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
Power On Volume
Num
… The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup …
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor …
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired
channel number order.
• Apply the video mute to channels you select. The video mute blanks out the
video from a channel and outputs only the sound while displaying a speaker icon
on the screen. The Channel Editor also lets you view information about each
channel easily, without your having to display each channel directly.
Dynamic SI OFF
• On : Check the DTV Programme channel number. (the DTV channel editor is
inaccessible)
• Off: Do not check the DTV Programme channel number. (the DTV channel editor
is accessible, but additional channel Programme number update is not sup-
ported)
Menu OSD
Picture Menu Lock OFF Enable or disable the Picture Menu.
Menu Display ON
• On : The Main Menu is displayed.
• Off : The Main Menu is not displayed.
Panel Button Lock Unlock
Turning the front panel (local key) operations on/off.
• Unlock : Unlocks all panel keys.
• Lock : Locks all panel keys.
• OnlyPower : Locks all panel keys except the Power panel key.
• Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display ON
OFF:The Home Menu is not displayed.
ON:The Home Menu is displayed.
Home Menu Editor Edit Home Menu .
Home Menu Auto
Start
ON
ON:The Home Menu is Auto Start.
OFF:The Home Menu is not Auto Start.
[HC460-ZA]Install-Guide-X0ENG.indd 13 2014-06-05 10:39:08