Samsung HG40NC460KFXZA - Manual (Page 15)

15
English
Menu Item initial Value Description
REACH
Solution
REACH 3.0 OFF REACH 3.0 On and Off
REACH 2.0 OFF REACH 2.0 On and Off
REACH Channel …
87:Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Group ID …
All:Select the group ID of the REACH server. (Refer to the REACH server manual for
more details)
IPG Room Type …
You can receive up to 3 EPG information headed to the Americas according to
Room Type from SI, and it displays the appropriate channel list and EPG information
according to the value set on TV.For IPG Room Type, there are Default / Public /
Roomtype3 within the hotel Factory Install menu, and its default value is Default.
Ticker OFF
• On : The TICKER content is displayed.
• Off : The TICKER content is not displayed.
REACH Update Time …
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
• 1hour : Every hour
• 2hour : Every 2 hours
• 12:00 am : every 12:00 a.m.
• 12:00 pm : every 12:00 p.m.
• 2:00 pm : every 2:00 p.m.
REACH Update
Immediate
…
• On : Whenever the TV enters standby mode (the power cord is plugged in and
the power is off), the REACH data is updated on the TV.
• Off : The REACH data is only updated on the TV at the REACH server update
time.
REACH
Solution
Room Number … Setting Room Number.
REACH 2.0 TV
Sound
…
OFF:Close REACH 2.0 TV Sound
ON:Open REACH 2.0 TV Sound
REACH 2.0 Server
Version
… 0000:Displays the current REACH data version.
Security
Password Input … Input Password 00000000.
Password Setting … Set new Password.
Password Reset … Reset Password to 00000000.
Security Mode … Security Mode ON or OFF.
USB … USB Disable or Enable.
HDMI … HDMI Disable or Enable.
DRM DRM Mode OFF
Configures CAS support.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
System
Self Diagnosis for TV …
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If the problem appears in the
test picture, select Yes and follow the directions on the screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If
the problem occurs during the test, select Yes and follow the directions on the
screen.
SW Update … SW USB Update function
Service Pattern OFF Same function with SVC Service Pattern
ATV Cable AGC Gain Default
Lets you control the AGC gain of the analog cable channels. Don't change the default
value unless problems occur.
DTV OpenCable AGC
Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
Contact Samsung … Samsung Contact information
TV reset … Factory reset
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
[HC460-ZA]Install-Guide-X0ENG.indd 15 2014-06-05 10:39:08