Aga Ranges U107501-01 - Manual (Page 32)

32
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Regulations
This range has been design-certifi ed by CSA
International according to UL858, latest edition.
Read the instructions before installing or using
this appliance. This range becomes hot in use. Take
safety precautions - see the safety warnings in the
User Guide, which should be read together with
this installation guide.
Installation of this range must conform with local
and national codes.
The range must be electrically grounded in
accordance with local codes or, in the absence
of local codes, in accordance with the National
Electrical Code (ANSI/NFPA 70, latest edition). See
‘Electrical Connection’ in this section.
Important
• Observe all governing codes and ordinances.
• The range must be properly grounded.
• Save these instructions for the local electrical
inspector’s use.
For Your Safety
Do not store or use combustible materials, gasoline
or other fl ammable vapors and liquids in the
vicinity of this or any other appliance.
Tools
You will need the following tools
1. Electric drill
2. Safety glasses
3. Masonry drill bit & anchors (only required if
fi tting the range on a stone or concrete fl oor)
4. Steel tape measure
5. Phillips head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Level
9. Pencil and ruler
Materials
Additional materials you may need:
• To protect any fl oor covering under the range a
sheet of 1/4’’ thick ply wood or equivalent large
enough to stand the range on