Samsung HLS6188WX-XAA - Manual (Page 130)

Using the D-Net
English - 130
Possible Solution
This message appears if you have connected a
1394 device or equipment other than a supported
device (DVHS, DTV, STB, AVHDD, Camcorder), or if
the connected device does not support the AVC
defined in the 1394 specifications, even if the device
is a supported device, when you have selected the
device to use it.
This message appears if there is a connection problem
when trying to use a D-Net device.
This message appears if the AVHDD is booting when
trying to use the AVHDD.
This message appears if the recording device is turned
off when trying to record using the D-Net device.
Please wait a moment until it is turned on.
This message appears if there is a connection problem
when trying to use a D-Net device. This message
appears when the response of the component device
malfunctions or is incorrect.
This message appears if the AVHDD has no space to
record.
Although you have connected external devices
according to the procedures described in the manual
to use the D-Net function, the D-NET ERROR message
may appear on the screen. In this case, check to see if
the jacks are damaged.
Problem
This device is unavailable for
D-Net.
Connection failed. Check if the
1394 cable is connected.
Initializing…
Please wait. A recordable device
is on standby.
Connection failed. The device is
not responding.
No space left on disc.
The D-NET ERROR message
appears on the screen.
BP68-00588H-00Eng(130~141) 4/25/06 3:41 PM Page 130