Samsung WAM751-ZA - Manual (Page 15)

A
Rear Panel
1 SPK ADD button
(Speaker Add)
Press this button to add an M7 to your network.
2 WPS/Wi-Fi SETUP
button
Press this button to connect your M7 to your network using WPS or Wi-Fi setup.
3
AUX IN Lets you connect the M7 to the analog output of a smart device.
4
SERVICE For service only. Lets service technicians update the firmware of the M7.
5
ETHERNET Lets you connect the M7 to your network using a LAN cable.
6
POWER Connection for the M7's power cord.
NOTES
9 SPK ADD Button: Press for 1 second to pair your M7 with a HUB.
9
WPS / Wi-Fi SETUP Button:
- Press for 1 second to connect the M7 to your wireless router using WPS.
- Press and hold down for more than 5 seconds until you hear a fast, 3 note beep to connect the M7 to
your network through your smart device using the Wi-Fi Setup method.
15
4444
SPK ADD
WPS / Wi-Fi SETUP
AUX IN
SERVICE
ETHERNET
POWER
SPK ADD
WPS / Wi-Fi SETUP
AUX IN
SERVICE
ETHERNET
POWER
SPK ADD
WPS /
Wi-Fi SETUP
AUX IN
SERVICE
ETHERNET
POWER
q
w
e
r
t
y