Samsung WAM751-ZA - Manual (Page 72)

Symptom Check Remedy
M7 doesn't work properly • Is the M7 plugged in?
• Does the M7's front LED indicator
remain red 5 minutes after turning
on?
• Plug in the M7.
• Check whether the Wi-Fi router
you're using had been certified for
Wi-Fi.
• Unplug the M7, plug it back in,
and then reconnect it to the router.
• Reset the M7 (see page 70).
Press here
• If used with a HUB
- Make sure the smart device and
the HUB are connected to the
same Wi-Fi network.
- Make sure the HUB's indicator
LED's show that it is working
correctly. (See page 23, item 3.)
Press here
- If the problem persists, reset the
HUB (see page 70).
Press here
- Unplug, then plug in the HUB.
Then, unplug and plug in the
M7.
- If you experience troubles with
connecting the HUB and M7,
try relocating the M7 so that
the M7 is closer to the wireless
router or HUB.
I cannot group speakers. • Is the product connected to the
network via Wi-Fi?
• If the product is connected
to the network via Bluetooth,
NFC tagging(Android only), TV
SoundConnect, or AUX IN, you
cannot use the group speakers
function.
72
4444