Samsung i8 (User Manual) - Manual (Page 21)

020
Selecting modes
You can select the desired working mode using the M (Mode) button
located on the back of the camera.
How to use the M (Mode) button
Starting the Recording mode
How to use the Auto mode
Select this mode for quick and easy picture taking with minimal user
interaction.
1. Insert the battery (p.15) taking note of
the correct polarity (+/-).
2. Insert the memory card (p.15). As this
camera has a 190MB internal memory,
it is not essential to insert the memory
card. If the memory card is not
inserted, an image will be stored in the
internal memory. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time that
is displayed on the LCD monitor is incorrect, reset the date/time before
taking a picture.)
5. Select the Auto mode by pressing the M(Mode) button.
6. Point the camera towards the subject and compose the image.
7. Press the Shutter button to capture an image.
If the auto focus frame turns to red when you press the Shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is less
likely to capture an image clearly.
Avoid obstructing the lens or the fl ash when you capture an
image.
00016 00016
01:00 PM 01:00 PM
2008/01/01 2008/01/01
00016 00016
01:00 PM 01:00 PM
2008/01/01 2008/01/01
SHOOTING
SCENE
MULTIMEDIA
Portrait
This mode is appropriate for
photographing people
MULTIMEDIA
SHOOTING
SCENE
Movie
In this mode, you can take a video.
MULTIMEDIA
SHOOTING
SCENE
Program
Directly set various features for shooting.
MULTIMEDIA
SHOOTING
SCENE
Auto
This mode minimizes user settings for
quick, convenient shooting.
SHOOTING
SCENE
MULTIMEDIA
Nightscene
This mode is appropriate for photographing
at night (use of tripod is recommend
<Pressing the Right button>
<Pressing the Right
button>
<Auto mode>
<Mode selection menu>
<Movie Clip mode>
<Scene mode>
<Pressing the
Up button>
<Pressing the
M(Mode) button>
<Program mode>
<Selecting a scene mode>
<Pressing the Left button>