Samsung NP700G7C-T01US - Manual (Page 67)

66
Chapter 3.
Using the computer
Using 3D
(for 3D models only)
2
If you put on the 3D active glasses and press the 3D button, the
data exchange begins between the glasses and the software
(hereafter, referred to as pairing).
Only when a 3D video or 3D game is executed can the •
pairing process be done.
More than one person can watch pictures in 3D at the
•
same time using more than one pair of glasses.
A chargeable pair of 3D active glasses may not work if
•
the battery is discharged. In this case, charge the glasses
before use.
For chargeable 3D active glasses, if the glasses do not start
•
working immediately when you put them on in 3D mode,
lightly touch the ‘sensor pad’ of the glasses or press and
hold the 3D button for 3~5 seconds to reattempt pairing.
For battery-operated 3D active glasses, you have to press
•
and hold the 3D button for 4~5 seconds or longer when
you perform pairing for the first time.
3
Now, you can enjoy videos or games in 3D.
The LED indicator for the battery-operated 3D active
glasses
On
If you press the power button, the LED
turns yellow for 3 seconds and then
turns off.
Off
If you press the power button, the LED
turns red for 3 seconds and then turns
off.
When the pairing
process is in progress The LED blinks yellow.
When the pairing
progress has been
completed
The LED alternates between blinking
yellow and red for 3 seconds each.
When the battery
needs to be replaced The LED blinks red continuously.