Samsung EC-S850ZSBG-E1 - Manual (Page 35)

Using the LCD monitor to set the camera settings
《34》
■ You can use the menu on the LCD monitor to set up recording functions. In any
mode with the exception of VOICE RECORDING mode, pressing the MENU
button displays the menu on the LCD monitor.
※ The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
- When there is no battery capacity.
■ The following functions are available, depending on the mode you have selected.
The items indicated by are default settings.
Menu tab Main menu Sub menu Camera working mode Page
3264X2448 3264X2176
3264x1824 2592X1944
2048X1536 1024X768
800X592 720X480
640X480 320X240
Super Fine Fine
Normal -
*30 FPS 20 FPS
15 FPS -
TIME 1S p.38
METERING Multi Spot p.37
AUTO FOCUS Multi AF Center AF p.37
SIZE
(Still image)
p.36
p.36
p.36
p.36
QUALITY
FRAME
RATE
SIZE
(Movie)
+ / - button
■ Exposure compensation : This camera automatically adjusts the exposure
according to the ambient lighting conditions.
You can also select the exposure value by using the
+ / - button.
● Compensating Exposure
1. Press the + / - button, and then use the UP and
DOWN buttons to select the exposure
compensation icon ( ).
The exposure compensation menu bar will appear
as shown.
2. Use the LEFT and RIGHT buttons to set the desired exposure compensation
factor.
3. Press the + / - button again. The value you set will be saved and the Exposure
Compensation setup mode will close.
If you change the exposure value, the exposure indicator ( ) will be
displayed on the bottom of the LCD monitor.
※ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good pictures.