Starting pc mode – Samsung EC-S850ZSBG-E1 User Manual
Page 78
《77》
Starting PC mode
■ Connecting the camera to a PC
■ Disconnecting the camera and PC : Refer to page 79
(Removing the removable disk).
※ If you selected [Printer] in Step 4, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
● Before inserting cables, check the directions and do not insert by force. It
may cause breakage of cable or camera.
INFORMATION
•If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
•In this mode, you can download stored images to your PC through the USB
cable.
•The LCD monitor is always turned off in PC mode.
SETUP
AF Lamp
Sound
USB
LCD
Video Out
Back:
Set:OK
Computer
Printer
■ Connecting the camera to a PC
1. In any mode with the exception of Voice Recording
mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the
[SETUP] menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[Computer], and then press the OK button.
5. Press the menu button twice and the menu will
disappear.
6. Connect the PC to the camera with the USB cable.