Samsung VCC96P0H1G-XAA - Manual (Page 7)

operating the vacuum _07
02 OPERA
TING THE V
ACUUM
- BODY
Press the power ON/OFF button repeatedly to start
and to stop the vacuum cleaner.
(OFF → ON → OFF)
If the remote handle control is not working, the
cleaner can be operated using the ON/OFF
button on the body of the machine.
1 The ON/OFF button operates the vacuum cleanner or stops it.
2
The filter light is illuminated when the dust pack requires checking or
emptying. An audio signal will also sound.
3
This indicates that the automatic suction mode is selected. The level of
suction is indicated by the LED display.
POWER CONTROL
1. Vacuum cleaner ON/OFF( )
Press the ON/OFF button to operate the
vacuum cleaner. Press again to stop the
vacuum cleaner.
2. Vacuum cleaner suction(-/+) and Auto Mode
Press the SUCTION(-/+) AUTO button to change
the suction power of the vacuum. When you
start, each time you press the button, you
increase the suction power. After you press the
suction button three times, the vacuum reaches
its maximum suction power. Then, an additional
press will set the vacuum to Auto mode. In Auto
mode, the vacuum adjusts the suction power automatically. After the vacuum has reached
Auto mode, when you press the button, you return it to its minimum suction power.
In short, suction operates in this sequence: 1 - 2 - 3 - AUTO - 1 - 2 - 3 - AUTO, etc.
3. BRUSH ON/OFF
Press the BRUSH ON/OFF button to operate the Power Brush. Press again to stop the
Power Brush.
Don’t cover the handle transmitter when you use a handle control button.
FCC NOTICE / FCC ID : A3LROH20S
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
RADIO FREQUENCY REMOTE-CONTROL
- HOSE
Handle Control
The cleaner is controlled by radio
frequency signals.
transmitter
1
2 3
DJ68-00621J-03.indb 7 13. 7. 31. �� 11:34