Samsung L730 - Manual (Page 16)

<< 15 >>
Connecting to a Power Source Inserting the memory card
Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- When the battery chamber cover
is opened, do not press the battery
chamber cover by force. This may cause
damage to the battery chamber cover.
There are 4 indicators for battery condition that are displayed on the
LCD monitor.
Battery indicator
Battery status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge
or use spare
battery)
Low battery
capacity
(Prepare to
recharge
or use spare
battery)
Battery
empty
(Recharge
or use spare
battery)
Insert the memory card as shown.
- Turn off the camera’s power before
inserting the memory card.
- Have the front of the memory card
facing toward the front of the camera
(Lens) and the card pins toward the
back of the camera (LCD monitor).
- Do not insert the memory card the wrong way round.
Doing so may damage the memory card slot.