Samsung L730 - Manual (Page 4)

<< 3 >>
Caution Contents
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in a minor or moderate injury.
Leaking, overheating, or damaged battery could result in fire or injury.
● Use battery with the correct specification for the camera.
● Do not short circuit, heat or dispose of battery in fire.
● Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long
period of time. Otherwise the battery may leak corrosive electrolyte and
permanently damage the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not touch
the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC
Charger. After use, always switch off the camera before unplugging the
cable from the wall socket. Then make sure that any connector cords or
cables to other devices are disconnected before moving the camera. Failure
to do so may damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
Credit cards may be demagnetized if left near case. Avoid leaving magnetic
strip cards near the case.
007 System chart
008 Identification of features
008 Front & Top
009 Back
010 Bottom
010 5 Function button
012 Connecting to a Power Source
015 Inserting the memory card
016 Instructions on how to use the memory card
018 When Using the Camera for the First Time
019 LCD monitor indicator
020 Starting the recording mode
020 How to use the AUTO mode
020 How to use the PROGRAM mode
021 How to use the ASR mode
021 How to use the MANUAL mode
022 How to use the SCENE modes
022 Portrait, Night scene mode
023 How to use the MOVIE CLIP mode
023 Recording the movie clip without sound
READY
RECORDING