Samsung SEET300AQK-XAR User Manual
Page 111
111
6.
If you wish to exit without removing any voice dialing entries press
and you will return to the previous menu.
6HW $FWLYH
Voice dialing is always on once you have programmed the phone to
accept voice dialing entries and associated the phone numbers. To
place voice dialing calls, press and hold
. Then say the name
into the phone after you hear the voice prompt and the beep.
You can also initiate a voice dialing call by simply opening the
phone’s flip(this option is selected through the menu).
To change voice dialing setup options:
1.
Press
to display the menu.
2.
Press
for Voice Dial.
3.
Press
for Set Active.
4.
Scroll between the following options:
♦
Enables voice dialing only by pressing and holding
.
♦
Enables voice dialing when the phone’s flip is open.
7UDLQLQJ
To use voice dialing, you must train the phone. To train the phone,
you are asked to say the word ‘Yes’ and then to repeat it. You are then
asked to say the word ‘No’ and to repeat it.
To train your phone:
1.
Press
to display the menu.
2.
Press
for Voice Dial.
newbook.book Page 111 Tuesday, October 23, 2001 12:27 PM