Samsung SEET300AQK-XAR - Manual (Page 44)

44
&DOOV
2XWJRLQJ
To place a call:
1. Press to power on your phone.
2. Enter the phone number you wish to call (up to 32 digits) by pressing
the digit keys. The phone number is displayed from left to right.
3. Press the key. The phone calls the number entered.
,QFRPLQJ
Your phone signals an incoming call or message in the following
ways:
♦
The backlight illuminates.
♦
The red LED on the top of the handset flashes.
♦
The ringer sounds (unless you have set the ringer to Vibrate or Off).
Incoming call notification continues until one of the following events
occurs:
♦
You answer the call.
♦
The calling party ends the call.
♦
The call is sent to Voicemail.
Your phone provides the following voice call notification features.
♦
Nine ring volume settings including Vibrate, Off, and 1-Beep.
♦
Nine unique ring types, twenty four melody tones, and ten
downloadable ring tones. (see “Ringer Type” on page 91).
♦
Name display with Caller ID.
♦
Automatic storage of an incoming call’s information in the Call
directory (the last 10 calls you answered are stored in the Incoming
newbook.book Page 44 Tuesday, October 23, 2001 12:27 PM