Samsung SC-D353-XAP - Manual (Page 84)

ENGLISH
IEEE 1394 Data Transfer
80 80
■ CPU: faster Intel ® Pentium III™ 450MHz compatible.
■ Operating system: Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory: more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder
to the DV jack of the other DV device.
■ Make sure that is displayed on the LCD screen.
4. Press the Start/Stop button to begin REC PAUSE mode.
■ PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
■ If you want to pause recording momentarily, press the Start/Stop button again.
7. To stop recording, press the (STOP) button.
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
■ Operation is not guaranteed for all the recommended computer environments mentioned above.
Recording with a DV Connection Cable
System Requirements
DV
USB
AV
MIC
DV
USB
AV
MIC