Usb interface (sc-d352/d353/d354/d355 only), English – Samsung SC-D353-XAP User Manual

Page 85

Advertising
background image

ENGLISH

USB Interface (SC-D352/D353/D354/D355 only)

81

81

The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)

You can easily transfer a image from a Memory card to a PC without additional add-on cards via a USB connection.

You can transfer a recorded file in memory card to a PC via a USB connection. (SC-D353/D354/D355 only)

If you transfer data to a PC, you need to install the software (DV Driver, Video Codec , DirectX 9.0) supplied with the
Camcorder.

High speed USB connection is supported by Microsoft (Windows) device drivers only.

Windows 98SE/ME - Full Speed USB

Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.

Windows XP - High speed USB on a system with Service Pack 1 or later installed.

It is not available for Macintosh systems.

[ Notes ]

USB 2.0 works only for removable disk functions.

On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.

On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.

Intel

®

Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.

Windows

®

is a registered trademark of the Microsoft

®

Corporation.

All other brands and names are property of their respective owners.

Operations are not guaranteed for all of the recommended computer environments mentioned above.

Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.

In M.Cam or M.Player mode, be sure that the Memory card is inserted into Camcorder before connecting USB cable.

If no Memory card or an unformatted Memory card is inserted, PC will not recognize your Camcorder as a removable disk.

(SC-D353/D354/D355 only)

USB Streaming requires Video Codec, DV Driver and DirectX 9.0.

If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.

If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly.

If this occurs, remove all other USB devices and try the connection again.

USB Connection speed depending on the System

System Requirements

Transferring a Digital Image through a USB Connection

CPU

Intel

®

Pentium III™, 600MHz

Intel

®

Pentium 4™ , 2GHz

OS(Operating System)

Windows

®

98SE/ME

Windows

®

2000/XP

Memory

128MB

512MB

HDD capacity

1GB or more

2GB or more

Resolution

1024 x 768 dots

1024 x 768 dots

24bit Color

24bit Color

USB

USB1.1

USB2.0 High Speed

Windows System

Minimum

Recommended

Advertising
This manual is related to the following products: