Finalizing the installation, Check your adjustments – Samsung FE-R300SB-XAA User Manual
Page 12
3. Check your adjustments
Use a spirit level to check your adjustments. Place the level diagonally on the oven rack or surface
cooktop, and check each direction for level.
1. Check direction 1.
2. Check direction 2.
If the spirit level doesn’t show level on the oven
rack or surface cooktop, adjust the leveling legs
with a wrench.
FINALIZING THE INSTALLATION
• Move range close enough to the opening to plug into the receptacle.
• Slide range into position insuring that the rear left(or rear right) leg slides under the Anti-Tip bracket.
The range will sit 0” away from the back wall when properly installed.
• Carefully tip the range forward to insure that the Anti-Tip bracket engages the back brace and
prevents tip-over.
• Turn on the electrical power. Check the range for proper operation as described in the user manual.
Anti-Tip bracket
Leveling leg
DG68-00108G-03
English - 12
Manual Installation_30 Oven_USA_DG68-00108G-03_EN.indd 12
2014-02-20 �� 1:54:21