Call forwarding, Call block, Tone length – Samsung SPH-A303ZDASKE User Manual
Page 81: The following options appear in the display
Section 7: CUSTOMIZE
81
Call Settings
Call Forwarding
1.
In standby mode, press the MENU (left) soft touch key (
), then press
(for
CUSTOMIZE),
(for
Settings),
(for
Call), and
for Call
Forwarding.The following options appear in the display:
•
Set Number
•
Cancel
2.
Use the navigation keys to highlight the method you wish to use for forwarding calls,
then press the
key.
Call Block
Call Block lets you control which incoming calls, if any, you wish to receive. Using Call
Block you can elect to ignore a List of specified numbers, or to ignore calls received from
specified Contact Group(s).
1.
In standby mode, press the MENU (left) soft touch key (
), then press
(for
CUSTOMIZE),
(for
Settings),
(for
Call), and
for Call Block. You’re
prompted to enter the password for your device.
Note: The default password is ‘0000’.
The following options appear in the display:
•
Settings — Lets you enable/disable Call Block; specify whether to ignore calls from Saved
Numbers, Unsaved Numbers, or All Numbers; assign a Sound Effect to ignored calls.
•
Blocked List — Lets you review and manage the list of Saved Numbers you selected in the
Call Log (see “Call Log” on page 30 for more information) or entered directly using Set
Number.
•
Blocked Group — Lets you ignore calls from one or more Contact Groups.
Tone Length
Use this menu to set DTMF settings to Short or Long.
1.
In standby mode, press the MENU (left) soft touch key (
), then press
(for
CUSTOMIZE),
(for
Settings),
(for
Call), and
for Tone Length.The
following options appear in the display:
•
Short — Select for a brief tone
•
Long — Select for an extended tone
2.
Use the Up and Down navigation keys to highlight the Tone Length setting of your
choice, then press
. Your setting is saved.
?@
.
TUV
GHI
ABC
?@
.
TUV
GHI
DEF
?@
.
TUV
GHI
GHI