Samsung HG28NC677AFXZA - Manual (Page 19)

19
English
¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER E buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item initial Value Description
Hospitality
Mode
Hospitality Mode Standalone
Select the Hospitality mode.
y Standalone mode: TV works alone, without an SI STB or SBB
y Interactive mode: TV works with an SI STB or SBB
SI Vendor SI Vendor OFF
y Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo /
Cardinal / Guestek / Seachange / EBL
y Stand-alone mode : OFF / Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
y User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel and Channel Type below.
y Last Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
Power On Channel
Num
… When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
y Select channel band : AIR (analog air band), DTV (digital air band), CATV
(analog cable band), CDTV (digital cable band)
Power On Volume Last Saved
y User Defined : Lets you set the Power On Volume manually. See Power
On Volume below.
y Last Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
Power On Volume
Num
… The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after
you have unplugged the TV and then plugged it in again.
y LAST OPT : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
y Power On : When the power returns, the TV turns on.
y Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup
Gives you direct, immediate access to some of the Channel menu functions
on the user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory.
Using Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying a
speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily,
without your having to display each channel directly.
Dynamic SI ON
y On : Check the DTV Program channel number. (If Dynamic SI is On, it is
not availale to edit DTV channels in Channel Editor.)
y Off : Does not check the DTV Program channel number. (If Dynamic
SI is Off, it is available to edit DTV channels in Channel Editor, but
additional DTV channel program number update is not supported.)
[HC670_677_678-ZA]Install Guide-X0ENG.indd 19 2014-03-17 10:02:27