Samsung HG28NC677AFXZA - Manual (Page 34)

34
English
Smoovie Set Up Sequence
Step
Smoovie TV Setup (Air/ Cable )
Only Air or Cable used Only Air or Cable used
If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done
1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu
2 After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select Smoovie TV in the Hotel menu
4 Select Smoovie TV in the Hotel menu Select Channel Setup
5
Select Channel Setup
(Can be skipped)
Select "Air" or "Cable" to auto tune
6 Select "Air" or "Cable" to auto tune. (Can be skipped,) Set up channels in the CH Bank Editor
7 Set up channels in the CH Bank Editor After power off & on, guests can use the TV
8 After power off & on, guests can use the TV
9
10
¦ Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
– Change the channel numbers and names, and sort the channels in your desired channel number order.
– Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the
sound while displaying a speaker icon on the screen.
– The Channel Editor also lets you view information about each channel easily, without your having to display each channel
directly.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
r
Channel Editor
▪ <Depending on model and region, some menu items may not exist.>
(HC678 model not have Security)
General Steps for Using the Channel Editor in Stand-alone Mode
Step Broad Outline
1 Run ‘Channel Auto Store’ in the Hotel Option Menu.
2 Enter ‘Channel Editor’ in the Hotel Option Menu.
3 On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4 Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled.
5 Press the EXIT or RETURN Button to exit.
<For a detailed explanation of how Channel Editor works, see pages 34 through 36.>
The picture below shows a sample Channel Editor screen.
[HC670_677_678-ZA]Install Guide-X0ENG.indd 34 2014-03-17 10:02:31