Samsung SC-DC163-XAP - Manual (Page 45)

SP
Disc is not formatted.
Format?
Video VR Cancel
STBY
<When a DVD-RW disc is formatted.>
ENGLISH
41
DVD Camcorder: Before Recording
When using a New Disc: Formatting a new Disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD–R/+R DL disc: Formatting will automatically begin.
For a DVD-RW disc: You are prompted with the <Disc is not formatted. Format?> message.
Differences between
Video and VR mode
Video (Video Mode) : If the disc has been fi nalized, you will be able to
play the disc on most DVD Players/Recorders.
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but
playback is only possible on a DVD Recorder.
Move the [Joystick] left or right to select <Video> or <VR>, then press [Joystick(OK)].
 Please refer to Page 11 for applications by mode.
 Upon completion, the <Complete !> message will appear.
 If you select <Cancel>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager>
menu. page 84
For a DVD+RW disc: You are prompted with the <Disc format? All fi les will be deleted!> message.
Move the [Joystick] left or right to select <Yes>, then press [Joystick(OK)].
 Upon completion the <Complete !> message will appear.
 If you select <No>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu. page 84
Removing a Disc
1. Push the [OPEN] switch in the direction of the arrow.
 The cover of the disc compartment will open.
2. Gently open the cover by hand until it stops.
3. Remove the disc.
 While pushing down the center portion of the turntable, pick up the disc by the edges to remove.
4. Gently push the section marked [PUSH CLOSE] on the cover of the disc insertion block, to close the cover.
 Refer to page 12 for Finalized disc compatibility.