Samsung DW80H9950US-AA - Manual (Page 5)

preparing the dishwasher enclosure _5
01 PREP
ARING THE DISHW
ASHER
preparing the dishwasher
enclosure
PRODUCT DIMENSIONS
ENCLOSURE DIMENSIONS
This dishwasher is designed to be enclosed
on the top and on both sides by a standard
residential kitchen cabinet unit.
The installation enclosure must be clean and free
of any obstructions.
The enclosure must be at least 24 inches wide,
24 inches deep, and 34 1/8 inches high.
For the front door of the dishwasher to be fl ush
with the leading edge of the counter top, the
counter top must be at least 25 inches deep.
Side view
(DW80H995 series,
DW80H994 series)
Side view
(DW80H997 series
DW80H993 series)
Rear view 70 ½ ” (670 mm)
20 ½ ” (520 mm)
25 ” (636mm)
23 7 ⁄ 8 ” (605 mm)
33
7 ⁄
8 ” (860mm)
20 ½ ” (520 mm)
25 ” (636mm)
5 ¾
” (140mm)
2 ½ ” (60mm)
2 ¾ ” (70mm)
The water supply
line, power cable
and drain hose
should go through
this space behind
the dishwasher.
Then, they run in
channels under
the dishwasher to
connections in the
front.
24” (610 mm)
minimum
24” (610 mm)
minimum
34 1⁄
8 ” (867 mm)
minimum
installation_DW80H9950US-00151A-02_EN_140811.indd Sec5:5 installation_DW80H9950US-00151A-02_EN_140811.indd Sec5:5 2014-08-11 7:39:28 2014-08-11 7:39:28