Samsung HPR5052X-XAP - Manual (Page 42)

42
When selecting Cable TV system :
Press the ▲ or ▼ button to select “Cable” or “Air + Cable”,
then press the ENTER button.
Press the ▲ or ▼ button to select “Digital Channel”, then
press the ENTER button.
Press the
▲ or ▼ button to select “STD”, “HRC”, or “IRC”,
press the ENTER button.
Press the ▲ or ▼ button to select “Analog Channel”, then
press the ENTER button.
Press the
▲ or ▼ button to select “STD”, “HRC”, or “IRC”,
press the ENTER button.
Press the ▲ or ▼ button to select “Start”, then press the
ENTER button to memorize the channels.
Note
• STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to “Storing Channels in
Memory” on page 43.
Auto Program T V
Move Enter Return
Select the cable system.
Digital Channel : STD √
Analog Channel : STD √
Start
Auto Program T V
Move Enter Return
Select the cable system.
Digital Channel : STD √
Analog Channel : STD √
Start
Auto Program T V
Move Enter Return
Select the cable system.
Digital Channel : STD
Analog Channel : STD
Start
STD
HRC
IRC
Auto Program T V
Move Enter Return
Select the cable system.
Digital Channel : STD
Analog Channel : STD
Start
STD
HRC
IRC
Auto Program
Enter Return
Auto Program in progress.
Cable Channel 67
Stop
BN68-00835A-00(036~049) 4/6/05 8:21 PM Page 42