Samsung MJ19BSASQ-XBG - Manual (Page 110)

z
Hue - To adjust the color tone.
z
Reset - To reset the monitor settings to the factory defaults.
Image Tab Definition
Adjusts the Fine , Coarse and Position values.
Image Setup
z
Fine : Removes noise such as horizontal stripes.
If the noise persists even after Fine tuning, repeat it after adjusting the frequency
(clock speed).
z
Coarse : Removes noise such as vertical stripes.
Coarse adjustment may move the screen image area.
You may relocate it to the center using the Horizontal Control menu.
z
Auto Setup : Auto adjustment allows the monitor to self-adjust to the incoming
video signal. The values of fine, coarse and position are adjusted automatically.
Position Adjusts the screen location horizontally and vertically.
Sharpness Changes the clearance of image.
Option Tab Definition
You can configure MagicTune™ using the following options.
Preferences
Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To
turn on or off any Preference, position the cursor over the box and click.
z
Transparency
z
Enable task tray menu .
- To access the MagicTune™ menus, click the icon on the [task tray menu].
The menus are not displayed if the [Enable System Tray] is deselected in
[Options] ' [Basic Settings].
Source Select
z
Analog
z
Digital
Color Weakness
This refers to the process that optimizes the color and maintains the optimized color.
z
Off - To cancel Partial Color Blindness Mode.